Komo-Tec Phase EX460 V6 エキシージ 3.5L 2GRエンジン搭載用 460PS 水冷インタークーラー付きアップグレードキット NO.1
Komo-Tec Phase EX460 V6 エキシージ 3.5L 2GRエンジン搭載用 460PS 水冷インタークーラー付きアップグレードキット NO.2
Komo-Tec Phase EX460 V6 エキシージ 3.5L 2GRエンジン搭載用 460PS 水冷インタークーラー付きアップグレードキット NO.3
Komo-Tec Phase EX460 V6 エキシージ 3.5L 2GRエンジン搭載用 460PS 水冷インタークーラー付きアップグレードキット NO.4
Komo-Tec Phase EX460 V6 エキシージ 3.5L 2GRエンジン搭載用 460PS 水冷インタークーラー付きアップグレードキット NO.5
Komo-Tec Phase EX460 V6 エキシージ 3.5L 2GRエンジン搭載用 460PS 水冷インタークーラー付きアップグレードキット NO.6
Komo-Tec Phase EX460 V6 エキシージ 3.5L 2GRエンジン搭載用 460PS 水冷インタークーラー付きアップグレードキット NO.7
Komo-Tec Phase EX460 V6 エキシージ 3.5L 2GRエンジン搭載用 460PS 水冷インタークーラー付きアップグレードキット NO.8
Komo-Tec Phase EX460 V6 エキシージ 3.5L 2GRエンジン搭載用 460PS 水冷インタークーラー付きアップグレードキット NO.9
Komo-Tec Phase EX460 V6 エキシージ 3.5L 2GRエンジン搭載用 460PS 水冷インタークーラー付きアップグレードキット NO.10

Komo-Tec Phase EX460 V6 Exige 3.5L 2GR Engine Upgrade Kit with 460PS Water Intercooler

Regular price¥3,300,000
/
Tax included.
  • backordered product

在庫が無く、発送にお時間いただく商品です。

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Over 250 installations worldwide.
Garage Shimaya has completed 10 installations.

Developed and tested at the Nürburgring Nordschleife.

*For overseas products such as Komotec, the selling price fluctuates depending on exchange rates. Please consider the prices in the online store as approximate. Please be sure to inquire about stock and pricing before ordering.

This kit upgrades the 3.5L V6 2GR engine of the V6 Exige S/Sport 350, which is equipped with a 350 hp supercharger, to 460 PS (kW)/48.95 kg·m (480 N/m). It is alsocompatible with the Sport 380 and CUP 380.

Stock specifications: 350 PS (258 kW)/40.8 kg·m (400 N·m)

This is the first kit for the V6 Exige to include a water-cooled intercooler.

Development began based on the proven EX430 and was completed after 14 months.

The biggest difference is the adoption of a water-cooled intercooler, which enables efficient cooling of the charge air and allows for higher performance without compromising engine durability.

The main development objectives of the EX460 are

  • Highly efficient charge air cooling
  • Minimizing charge pressure loss
  • Weight reduction and minimization of the cross-sectional area of each component

Because a more efficient intercooler core than the existing charging system was adopted, it was necessary to replace the stock intake manifold with completely newly developed original parts. The new intake manifold was made by machining aluminum. With this intercooler, boost pressure and ignition timing could be optimized, achieving an output of 460 PS. What is particularly noteworthy is that maximum torque of 500 Nm could be achieved at a very early stage.

By optimizing the stock supercharger unit, it was successful in significantly improving power and torque in the mid-engine speed range where the supercharger operates most efficiently. The thermal load on engine components was reduced due to the reduction in charge air temperature. (Please refer to Media & Download) The compressor used is the stock one, but the internal specifications have been reviewed.

At the front of the vehicle, a new proprietary heat exchanger is separately installed to cool the cooling water for the intercooler. A new electric water pump is installed to further enhance the circulation of the cooling water.

The main advantages are as follows.

  • Reduction of intake temperature by approximately 35°C
  • At a boost pressure of 0.6 bar, the loss through the radiator core is only 0.03 bar
  • Weight increase due to the heat exchanger is only 4.6 kg *excluding cooling water
  • 106 PS (78.3 kW) increase in horsepower and approximately 8 kg·m (80 Nm) increase in torque

The kit includes the following.

  • KT460 carbon airbox and K&N Sport air filter
  • Dedicated pulley
  • Optimized stainless steel exhaust manifold
  • HJS 200-cell sport catalytic converter
  • O2 sensor extension cable
  • EX460 kit-specific ECU data set *Changes to ignition/injection timing and valve timing
  • EX460 decal set
  • Heat exchanger cooler
  • Electric water pump
  • Aluminum tank for charge cooler
  • All-aluminum intake manifold *Built-in charge cooler and injector holders, black anodized water hoses

The price includes the following in addition to the parts.

  • Kit installation labor
  • Power check before and after installation

EX460 Installation Blog Part 1 Part 2

*The cost for vehicle-specific fitting is not included in the price and is required separately.
Fitting cost: 100,000 yen (excluding tax). Since it is normally 200,000 yen (excluding tax), this is a special price for simultaneous purchase with Komotec.

*The ECU data provided by Komotec is included, but we strongly recommend individual vehicle fitting. Strictly speaking, there are slight differences in fuel properties by country (not only octane rating). Due to this, the theoretical air-fuel ratio strictly speaking varies slightly by country.

*We have a large number of ECU tuning installation records, but based on that experience, we have concluded that reusing data is not the best choice, and currently, we only perform vehicle-specific fitting for all.

↓ Test at the Nürburgring

↓Development at the first dyno

↓ Driving at the famous Spa-Francorchamps circuit

↓ Driving on public roads

 


Recently viewed