Further modifications have been made.
We have addressed the concern that the brake lines may interfere with the knuckle arms depending on the condition of the vehicle.
As with the previous version update, we used FEM (computer simulation) to properly calculate stress, ensuring strength while reducing weight through material removal.
*The manufacturer cannot be disclosed, but production is outsourced to a certain top-tier racing car constructor.
For those seeking higher grip!
These knuckle arms feature camber angle adjustment and bump steer correction.
You can add up to about 3 degrees of camber.
*Reference value: Approximately 2.3 degrees with stock knuckle arms on Lotus CUP race cars
*The maximum camber angle varies depending on the ride height.
*Even more camber can be added.
They also contribute to weight reduction, weighing about half as much as the stock knuckle arms.
Material: Super duralumin (A7075)
Weight: 330g per piece *Stock: 730g per piece
*Price is for a left/right set.
*This is a competition-only part.
For those concerned about strength because they are made of aluminum alloy, we have sold about 100 units and have never had a single issue. Please use them with confidence even on the track. The machined stock version cannot address bump steer when lowering the car and has camber angle limitations, so this one is highly recommended.
For a blog post about negative camber, click here
Applicable Models
All V6 Exige models