ECU Tuning Lotus Elise Exige
- In stock, ready to ship
- Inventory on the way
We will carry out ECU tuning using Dynapack.
For the purpose of ECU tuning
Ideally, optimizing the air-fuel ratio even by changing the sports cleaner will improve the robustness of the fit data. However, our company has determined that no actual damage has occurred so far = control is somehow established within the learning and correction values of the genuine data, so we do not recommend it.
- Optimization of air-fuel ratio
- It also has the purpose of protecting the engine when hardware is changed.
- Power up
- Improved ride quality by changing the throttle control map, etc.
as specific work
Garage Shimaya only supports the current car.
From past experience, the same model and the same specifications did not result in the same data. This means that there are large individual differences between Lotus vehicles, and in order to demonstrate the best performance, it is essential to perform calibration work on the actual vehicle. I am judging.
- Genuine ECU rewrite
- Light tune support Example: change of intake and exhaust
- Motec each model (full computer)
- Necessary for dealing with large-scale hardware changes such as boost-ups
- Data can be optimized in all areas from low load to high load
- It is essential when introducing a flat shift due to a combination of dog missions, etc.
- BLACK ECU (full control) *2ZR and 2ZZ engines only
- Necessary for dealing with large-scale hardware changes such as boost-ups
- Data can be optimized across the entire range from low load to high load
Work cost
Current car adaptation work 200,000 yen (excluding tax) ~
- Dynapack usage fee
- Power check twice before and after
- A/F sensor mounting boss welding *It is not something that can be installed anywhere on the exhaust pipe, but it is installed after verifying and confirming the optimum position per gas for the sensor.
- Current car setting
Please contact us as it varies depending on the specification change.
In the case of MOTEC and BLACK ECU, a separate hardware change and purchase cost will be incurred, please contact us for details.
Major changes
- fuel main map
- goal lambda map
- ignition timing map
- VVT map
- Target idle speed
- throttle control map
- idle ignition timing
- fuel cut speed
- fuel cut speed
- Electric fan operating temperature
*Changes may vary depending on the type of vehicle and vehicle conditions.
<Compatible models>
- 1ZZ engine
- Electronically controlled throttle model with 2ZZ engine *S2 Elise, Exige
- *The wire throttle model is compatible, but only the BLACK ECU (full control) is compatible.
- Model with 2ZR engine ※Elise S, Elise Sport 220
- Model with 2GR engine *V6 Exige S, Sport 350
*CUP380, Sports 410, and CUP430 of V6 Exige are installed in a separate menu, so please contact us separately.
*The above models cannot be installed with Dynapack.
ECU tuning blog is here