Following the specification change to the rear stabilizer last time, we have added a front stabilizer specification this time.
We have added a new 22.2φ specification.
Originally, it was designed for vehicles weighing between 720 kg and the early 830 kg range, but due to increased vehicle weight, power increases from supercharger additions, and improved tire performance, it was undeniable that it was underpowered.
Going forward, we would like to add the 22.2φ specification to the existing 21φ and sell them in two lineups.
① 21φ specification, mainly for fast street driving setups for vehicles equipped with Rover engines or Toyota engines (including NA and SC)
② 22.2φ specification, mainly for those who enjoy circuit driving with Toyota engines
|
Rigidity ratio (vs. stock) |
|
| Stock stabilizer (19φ) |
100% |
No adjustment *Higher models are adjustable
|
| Reinforced stabilizer (21φ) |
127% 132% |
2-step adjustment |
| Reinforced stabilizer (22.2φ) |
153% 158% |
2-step adjustment |
The rubber bushings can withstand up to 120°C, making them resistant to radiant heat.
Lightweight pipe stabilizer, front, ARC
Roll suppression and straight-line stability improved.
With a suspension setting that has stroke, steering response is also improved.
The hollow structure achieves both weight reduction and high rigidity.
Applicable models
S1 Elise, Exige, 2-Eleven, S2 Elise, Exige, S3 Elise
*Models equipped with adjustable stock stabilizers such as CUP240 require bracket changes.
*It should be installable on late-model S1 Elises, but confirmation is required.
*Early-model S1 Elises should require bracket changes, to be confirmed.
→ If you need brackets, please contact us individually.